Removing the Subscriber Identification Module (SIM) card
CAUTION: Removing the SIM card when the computer is on may cause data loss or damage the
card. Ensure your computer is turned off or the network connections are disabled.
1.
Insert a paperclip or a SIM card removal tool into the pinhole on the SIM card tray.
2.
Remove the SIM card from the SIM card tray.
3.
Push the SIM card tray into the slot until it clicks into place.
Removing the base cover
1.
Follow the procedure in
2.
To remove the base cover:
a. Loosen the screws that secure the base cover to the computer [1].
b. Lift the base cover from the edge and remove it from the computer [2, 3].
NOTE: You may need a plastic scribe to lift the base cover from the edges.
Installing the base cover
1.
Align the base cover with the screw holders on the computer.
2.
Press the edges of the cover until it clicks into place.
3.
Tighten the screws to secure the base cover to the computer.
4.
Follow the procedure in
Removing the battery
1.
Follow the procedure in
2.
Remove the
base
cover.
3.
To remove the battery:
10
Before working inside your
After working inside your
Before working inside your
computer.
computer.
computer.