BMW i3 Owner's Manual page 125

Activating COMFORT
Press button repeatedly until COM‐
FORT is displayed in the instrument
cluster.
ECO PRO
ECO PRO, refer to page 155, provides consis‐
tent tuning to maximize range.
Comfort functions and the engine controller
are adjusted.
The program can be configured to individual
specifications.
Activating ECO PRO
Press button repeatedly until ECO
PRO is displayed in the instrument
cluster.
Configuring ECO PRO
1. Activate ECO PRO.
2. "Configure ECO PRO"
Make the desired settings.
ECO PRO+
ECO PRO+, refer to page 155, also limits the
maximum speed and reduces climate control
and lighting functions.
Comfort functions and the engine controller
are adjusted.
Activating ECO PRO+
Press button repeatedly until ECO
PRO+ is displayed in the instrument
cluster.
Driving stability control systems
Online Edition for Part no. 01 40 2 960 865 - II/15
Displays
Program selection
Pressing the button displays a
list of the selectable programs.
Depending on your vehicle's op‐
tional features, the list in the in‐
strument cluster can differ from
the illustration shown.
Selected program
The ECO PRO and ECO PRO+ driving pro‐
grams are shown in the instrument cluster. In
addition, the display on the automatic climate
control lights up
Display on the Control Display
Program changes can be displayed on the
Control Display.
1. "Settings"
2. "Control display"
3. "Driving mode info"
Drive-off assistant
This system supports driving off on inclines.
The parking brake is not required.
1. Hold the vehicle in place with the foot
brake.
2. Release the foot brake and drive off with‐
out delay.
After the foot brake is released, the vehicle is
held in place for approx. 2 seconds.
Depending on the vehicle load, the vehicle may
roll back slightly.
Driving off without delay
After releasing the foot brake, start driv‐
ing without delay, since the drive-off assistant
will not hold the vehicle in place for more than
approx. 2 seconds and the vehicle will begin to
roll back.◀
Controls
109