Table of Contents
Advertisement
4. To remove magnetron. (Refer to Fig. 4)
1) Remove a screw 2 which secure the magnetron 1.
2) Remove the magnetron.
3) Reverse the above steps for reassembly.
CAUTION : Never install the magnetron without the metallic gasket plate which is packed with each magnetron to
prevent microwave leakage. Whenever repair work is carried out on magnetron, check the microwave
leakage. It shall not exceed 4mW/cm
Metallic
gasket
plate
Cooling fin
Filament
terminal
<Magnetron>
Fig. 4
2
for a fully assembled oven with door normally closed.
Magnetron
antenna
11
Magnetron antenna
Wave guide
Metallic gasket plate
Advertisement
Table of Contents
