Real-El RM-300 Wireless User Manual page 6

ENG
User's Manual
RM-300 WIRELESS
• After finishing work you can pull out the receiver
 from the PC USB port

and insert it into the mouse (Fig. 6). When using the receiver again, pull it
out from the mouse (Fig. 7) and connect it to the PC USB port again.
• Do not place the receiver into a confined metal space (table drawer, box,
safe), as a metal screen does not transmit radio signals.
• If the battery run down, the mouse works in jerks. It means that the bat-
tery should be replaced with new ones, as it is shown in Fig. 4. Always ins-
tall only identical new battery.
Fig. 6. Fitting the receiver
Fig. 7. Extraction of the receiver
into the mouse case
from the mouse case
5
Technical support: www.real-el.com