Silverline Turbo Mig 100 Gasless User Manual

Download this manual

Enlarged version

Thank you for choosing this product.

This product is guaranteed to be free of defects in materials and workmanship for a period of

Users Manual

3 years from the purchase date.

Turbo Mig 100 Gasless

If you experience a problem, return the product direct to us, with the original receipt at :

Product Code 282562

Silverline Tools Limited.

PO Box 2988,

Yeovil.

BA21 1WU.

We do not refund carriage. This guarantee is for Great Britain only and does not affect your

statutory rights. As you would expect fair wear and tear are not covered.

282562_Instructions.indd 1

27/3/07 14:39:18

Need help?

Do you have a question about the Turbo Mig 100 Gasless and is the answer not in the manual?

Page 1 This product is guaranteed to be free of defects in materials and workmanship for a period of Users Manual 3 years from the purchase date. Turbo Mig 100 Gasless If you experience a problem, return the product direct to us, with the original receipt at : Product Code 282562 Silverline Tools Limited.
Page 2 Keep these instructions with the product for tie back long hair. Use safety footwear if necessary. Turbo Mig 100 Gasless future reference. Ensure all persons who use and service this • Wear safety goggles at all times, every day glasses are not product are acquainted with this manual.
Page 3: Troubleshooting Chart
TROUBLESHOOTING CHART SETTING UP THE WELDER 1. Connect the earth clamp to the metal to be welded. To load a new wire reel follow the procedure below: 2. Set output and wire feed speed by selecting the appropriate 1. Remove the shroud from the torch and unscrew the contact tip. controls (see ﬁg.