SEVERIN 7070 Instruction Manual page 17

CY7070.book Seite 17 Mittwoch, 11. Februar 2015 2:34 14
Maintaining and cleaning
Problem
The appliance hardly
picks up any dust and/or
the suction power drops
The dust container loos-
ens itself while carrying
Odours spread or even
dust escapes from the
appliance
If this does not help, contact our customer service (page 67).
The contact data is in the appendix to this instruction manual or on our home page.
Solution
Empty and clean the dust container page 15, "Emptying the dust
container".
It is recommended to service the filters at this occasion as well
page 15, "Cleaning or replacing the filter".
Attached nozzle is unsuitable for the floor to be cleaned.
Change the nozzle, illustrated Quick Start Guide, page 1.
With the switchable floor nozzle attached, the switch is not in a po-
sition appropriate to the type of floor.
Adjust the position of the floor nozzle switch, illustrated Quick
Start Guide, page 1.
Suction power setting is possibly not appropriate to the type of
floor.
Adjust suction power, page 14, "Adjusting the suction power".
You possibly triggered the dust container release accidentally
while carrying the appliance.
Make sure not to push the dust container release while carrying.
Parts that were removed for servicing or changing of accessories
have possibly not been re-installed or closed correctly.
Check all parts for proper installation, illustrated Quick Start
Guide.
17