Introduction Thank you for purchasing the Ubiquiti Networks® mFi® mPower PRO (EU). The mPower PRO (EU) is a power strip ™ with Ethernet and Wi-Fi capability designed for use with the Ubiquiti mFi platform. Once connected, you can use the mFi Controller software to monitor your devices and define automation rules using your web browser.
Hardware Overview Status Front Ethernet Port Device Reset Circuit Breaker Button Reset Button...
Page 4
Status LED The Status LED primary states are listed below: Solid yellow When first • Flashing blue powered on in factory Connecting to mFi default mode. Controller. • Solid blue Successfully connected to mFi Controller. Device Reset Button The Device Reset button serves two functions: •...
Hardware Installation 1. Connect the mPower PRO (EU) to a power outlet. 2. Connect an Ethernet cable to the Ethernet port on the mPower PRO (EU).
Page 6
The mPower PRO (EU) can be connected to your network using one of two methods: • Ethernet The mPower PRO (EU) is DHCP-enabled. Connect the Ethernet cable from the mPower PRO (EU) to your LAN. Wi‑Fi • The mPower PRO can connect to a wireless network once Wi-Fi settings have been configured using the Ethernet connection.
Page 7
Wall-Mount The mPower PRO (EU) includes an optional mounting plate. 1. Position the Mounting Plate on the wall with the text in the proper orientation, and mark the mounting holes on the wall. Wall Mount Slide 2. Use a 6 mm drill bit to drill the holes.
4. Align the back of the mPower PRO (EU) with the Mounting Plate. Slide the mPower PRO (EU) to the right to lock it into place. Software Download and Installation For local mFi Controller installations, the mFi Controller software is installed just once when you initially create a mFi network.
Page 9
Mac Users 1. Open the mFi.dmg file. 2. Click the Install icon. 3. Click Continue and follow the on-screen instructions to install the software. 4. Go to Go > Applications and double-click the mFi icon. Proceed to the Configuring the mFi Controller Software section.
Page 10
PC Users 1. Launch mFi‑installer.exe. 2. Click Install. 3. If your computer doesn’t have Java 1.6 or above installed, you will be prompted to install it. Click Install to continue. 4. Ensure the Start mFi Controller after installation option is checked and click Finish.
Page 11
Note: The mFi Controller software can also be launched from Start > All Programs. Configuring the mFi Controller Software 1. The mFi Controller software startup will begin. Click Launch a Browser to Manage the Network. 2. The mFi Configuration Wizard will appear the first time you launch the mFi Controller software.
Page 12
3. Select the device(s) that you want to configure. The Refresh button can be used to refresh the list of devices. Click Next to continue. 4. Enter an administrator name in the Admin Name field. Enter a password in the Password and Confirm fields. Click Next. 5.
Page 13
The Configuration Portal can be accessed in two ways: • Connect an Ethernet cable directly from your computer to the Ethernet Port on the mPower PRO (EU) and configure your computer with a static IP address. • Connect an Ethernet cable from your DHCP-enabled LAN to...
Page 14
Configuration Portal via Ethernet to Computer 1. Make sure that your computer is directly connected via Ethernet to the Ethernet Port on the mPower PRO (EU). 2. Configure the Ethernet adapter on your computer with a static IP address on the 192.168.1.x subnet.
Page 15
If it is not already installed, download the Ubiquiti Device Discovery Tool (v2.3) at www.ubnt.com/download#app 1. Launch the Ubiquiti Device Discovery Tool. 2. A list of Ubiquiti devices on the network will appear. Locate the appropriate device (named P6E) under Product Name and double-click it.
Page 16
3. Click WEB UI on the right. Configuration Portal Interface Settings 1. The login screen will appear. Enter ubnt in the Username and Password fields. 2. The Main tab of the Configuration Portal will appear. Click the Configuration tab.
Page 17
3. Enter your configuration information on the Configuration tab: mFi Controller Select the mFi Controller from the drop-down and enter the Controller information: Enter the following settings: • Address The IP address and http port used by the Controller. (The port is usually 6080, for example: 1.1.1.1:6080 or mfi.acme.com:6080).
Page 18
Wireless Settings To use the mPower PRO on a Wi-Fi network, configure the Wireless Settings: a. Click Scan for a list of available SSIDs and select the appropriate SSID or type in the name manually in the SSID field. b. Select the appropriate Security and Authentication settings for your network.
Page 19
6. The mPower PRO appears with the mPower icon in the left panel under the Drag on to Map heading. Once you’ve customized your map, you can position the mPower PRO in the appropriate location. For additional details on the mFi Controller software, please refer to the mFi User Guide available on our website at: documentation.ubnt.com/mfi...
Specifications mPower PRO (EU) Dimensions 250.37 x 116.7 x 49 mm Weight 754.4 g Mounting Wall (Kit Included) Power 220-250VAC, 50 Hz, 16 A Per Outlet, 16 A Total Outlets Networking Interface (1) 10/100 Ethernet Port Wi-Fi Standards 802.11b/g/n Memory...
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Use only in a dry location. WARNING: Do not plug in to another relocatable power tap. WARNING: To reduce the risk of electric shock, use only indoors.
Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation;...
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING.
Page 24
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
Page 25
RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
Page 26
Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
[German] Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Ελληνική Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις [Greek] βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 1995/5/ΕΚ.