lifeSMART LS-330 User Manual

Digital Clinical
TM
Thermometer/ LS-330

Description of this Thermometer

① LCD
② Standby/ scan button
③ Measuring tip
Read and save these instructions
Before using your device, please read these instructions and warnings completely. Remove
the transparent protective layer from the thermometer panel before the first use.

Features

• Big size of LCD.
• Have backlight design in order to operate in dark.
• Flexible probe enables easy, safe and gentle
measurement.
• Suitable for oral, rectal and armpit measurement.
• High body temperature indication function
• Beeping indication at the end of measurement
• Last measure memory
• Automatic switch off
• IPX7 , can be water resistance
• Aesthetic Design

Safety Precautions

MARKS OR SYMBOLS
MUST OBSERVE
Means Obligatory with detailed items expressed in words or figures
within or beside the mark. Left one means General Compulsory.
PROHIBITION
Means Forbidden with detailed items expressed in words or figures
within or beside the mark. Left one means General Forbidden.
Means a possibility of personal injury in case of improper use.
Means a possibility of personal injury or property damage in case of
improper use.
Before the first use and after every successive use, clean and sanitize the thermometer's
using medical alcohol.
● Use of thermometer without prior disinfection may communicate pathogenic bacte-
ria.
To keep healthy, please put on the probe cover when measuring oral temperature.
● You may still get infected by the remaining bacteria when you take the oral tempera-
ture even you disinfected the thermometer.
If got hemorrhoids, please don't take rectal temperature.
● The measuring probe of thermometer may hurt the hemorrhoids
The thermometer is not a toy; store it in a safe place out of reach of children.
● The children may damage the thermometer or swallow the battery.
Avoid temperatures above 60°C. NEVER boil the thermometer!
● The over-heating temperature may damage the device and cause fire.
The measuring result can only used for health monitoring and reference. Please don't
conduct diagnose and treatment based on the measuring result, if you find the body
temperature is abnormal, please contact your doctor.
Don't use any sharp tool, scissors etc. to scissor, cut , shear, scratch the measuring probe.
● When you use again, the measuring probe parts may be pealed off and swallowed by
the bite and pull.
Don't take temperature after drinking hot water.
● The hot water will enhance the oral temperature temporarily,and might cause result
variations.
Don't take the temperature immediately when you take the medicine which may
enhance the body temperature.
● The body temperature may be enhanced under the drug effect.
Don't talk or eat when you are measuring the oral temperature. During the
measurement, use nose to breath to prevent the probe getting exposed to air.
Thank you for purchasing
this LifeSmart digital
thermometer.
Don't take temperature after sports, bathing or swimming.
● Playing sports will enhance the body temperature. Please wait for 15 to 30 minutes
before taking temperature.
Protect the thermometer from impact and dropping!
The minimum measurement time until the beep is heard must be maintained without
exception!
The operating ambient temperature range for this thermometer is 10-35°C(50-84.5°F)。
The thermometer must be stored according to the technical specifications.
Strong electromagnetic fields can effect the correct functions of the thermometer.
RECOMMENDATIONS
① Don't use this thermometer for other purposes other than measuring human body
temperature.
② It is forbidden to leave the product exposed to any chemical solvent, direct sunshine
or high temperature.

INTENDED USE

Except for measurement of armpit, oral and rectal temperature, don't use this product for
other purposes. It can be used for anybody, e.g. for new-born, for children and adults.

HOW TO USE THE THERMOMETER

LCD display

Turning on the Thermometer

To turn on the thermometer, the LCD will be fully display.
LCD would show last reading
enter self-check.
°C
If the last reading is below 32 , LCD would show
Function Test
Correct functioning of the thermometer is tested automatically each time it is turned
on. If a malfunction is detected (thermistor is open-circuit or short-circuit), should be
showing the "Err" in the LCD, and a measurement becomes impossible. In this case, the
thermometer must be replaced.
°C and °F unit switching function
Pressing the Standby/ Scan button ( ) for 4 seconds at power saving mode,
after the all segments should be displayed, the temperature unit will be
switching "°C" to "°F" or "°F" to "°C".

High body temperature hint function

If the measurement value ≥37.6°C, it would have sound with "Bi Bi......" lasting
3 times, and the red LCD backlight on about 5 seconds.

Using the Thermometer

Place the thermometer at the measuring site before switching it on in order to achieve
the most accurate result.
Choose the preferred measuring method. After self-check, LCD shows
symbol. After °C the symbol flashs , put the thermometer inside the measuring
location. In 8-10 seconds, the measurement will end when the °C the symbol stops
flashing. If the beep is heard determined and the thermometer "°C" or "°F" is no loner
flashing, the measuring has been completed and the thermometer can be read now.
To prolong the battery life, turn off the thermometer or it will automatically turn off
after about 3±0.5 minutes.

Measuring Methods

In the mouth (oral)

◆
Post the thermometer in one of the two pockets under the tongue,
to the left or right of the root of the tongue. The measuring probe
( ③ ) must be in good contact with the tissue.
Close your mouth and breathe evenly through the nose to prevent
the measurement from being influenced by inhaled/exhaled air.
After the measurement, LCD would show the value with "BI BI......"
sound three times.
To reduce the risk of infection it is recommended to use a probe
cover while taking measurements. Probe cover is not included in
the package, please buy them from professional thermometer
market with CE mark and comply with biocompatibility
requirements.

◆ In the armpit (axillary)

Place the probe tip ( ③ ) under the armpit parallel to the arm, pressing the arm against
the body.
Hold the thermometer in this position until you Heard the beep sound 3 times, the
measuring is finishing.
To receive more reliable results we recommend to Measure temperature orally or rectally.
about 2 seconds with backlight flash also, then
for 2 sec.