Back Panel Layout - Shure EX 6010 User Manual

DCS 6000 Digital Conference System

Back panel layout

Connectors
3. Mains Power connector
Connection for mains power. See specs.
4. Loop through connectors
RJ45 connector, 2 pieces with auto-termination
DCS-LAN connectors for connection to the CU
6105 or CU 6110 and for connection to other units
with DCS-LAN connectors, such as more EX 6010.
5. Repeated Chains 1, 2, 3 & 4
RJ45 connector, 4 pieces
Those connectors are DCS-LAN connectors for
connection to DM/CM 6xxx, IS 6132, CS 6032, EX
6010, AO 6004/6008 etc.
6. Power LED's
Those LED's light up when Power is available on
the connector next to the LED and only if the
voltage is over 24V (not overloaded).
7. Incoming data LED's
Those LED's lights up, when the unit is received
in-coming data from connected units on the
connector next to the LED.
8. Outgoing data LED
This LED lights up when outgoing data is
received from the central unit
10
User Manual