Charging The Battery - Panasonic FZ-X1 series Operating Instructions Manual

Charging the battery

Charging the battery
You can charge the unit by connecting it to a power outlet using an
AC adaptor (page 58), and also by connecting it to the USB port of a
computer or other device using a USB cable.
The indicator lights in orange while the battery is charging, and lights
in green when charging is complete.
Connect the AC adaptor and power cord as shown in the illustration
below.
Note
• When connecting a USB cable, note the shape of the micro
USB plug and the micro USB port. Do not attempt to connect
the USB cable upside down.
• Remove any dust or water droplets from plugs before
connecting them. Do not use excessive force when inserting
plugs or insert them at an angle.
• If the installed battery fails the unit's battery authentication test,
the battery cannot be charged.
Confirming the battery level
The battery level is displayed in the upper-right corner of the screen,
in the status bar.
Getting Started 41