Table of Contents
Advertisement
distance compared to the fastest one, MioMap will choose this one instead to save
fuel.
6.3.2 Vehicle
You can set the type of the vehicle that you will use to navigate the route. Based
upon this setting, some of the road types will be excluded from the route (e.g.
motorways for pedestrians), or some of the restrictions may not be taken into
account (e.g. emergency vehicles have no restrictions). Available values:
• Car
• Taxi
• Bus
• Lorry
• Emergency
• Bicycle
• Pedestrian
6.3.3 Road types to include/exclude
To let the route fit your needs you can also set which road types are to be
considered for or to be excluded from the route if possible.
Note: Excluding a route is a preference. It does not necessarily mean total
prohibition. If your destination can only be accessed using some of the excluded
road types, MioMap will use them but only as much as necessary. In this case a
warning icon will be shown on the Route Information screen (Page 31), and the road
not matching your preference will be displayed in alternate colour on the map.
6.3.3.1 Unpaved Roads
Unpaved roads are excluded by default, as they can be in a bad condition and you
usually cannot reach the speed limit on them.
6.3.3.2 Motorways
When driving a slow car or towing another vehicle, you may prefer not to take
motorways.
6.3.3.3 Ferries
The accessibility of temporary ferries is not necessarily included in the map data.
Furthermore you may need to pay fare, so you may consider disabling them from the
preset enabled status.
70
Advertisement
Table of Contents
