Chevrolet camaro Owner's Manual page 61

60 Infotainment System
recognises the new connected
phone after the pairing process
is complete.
6. If the phone prompts to accept
connection or allow phone book
download, select always accept
and allow. The phone book may
not be available if not accepted.
Some phones will put
connection request or
phonebook request in a pull
down task bar at the top of the
screen. Drag down the task bar
and look for connection/
phonebook request and accept.
7. Repeat to pair additional
phones.
Listing All Paired and Connected
Phones/Devices
1. Press the CONFIG button on the
faceplate or the Config screen
button.
2. Select Phone Settings.
3. Select Device list.
Deleting a Paired Phone/Device
1. Press the CONFIG button on the
faceplate or the Config screen
button.
2. Select Phone Settings.
3. Select Device list.
4. Select the phone to delete and
follow the screen prompts.
Connecting to a Different Phone
To connect to a different phone, the
new phone must be in the vehicle
and available to be connected to the
Bluetooth system before the
process is started.
1. Press the CONFIG button on the
faceplate or the Config screen
button.
2. Select Phone Settings.
3. Select Device list.
4. Select the new phone to connect
to and follow the screen
prompts.
Pairing with Voice Recognition
A Bluetooth-enabled mobile phone
must be paired and then connected
to the vehicle before it can be used.
See the mobile phone
manufacturer's user guide for
Bluetooth functions before pairing
the mobile phone.
Pairing a Phone
1. Press . The system responds
Please say a command,
followed by a tone.
2. Say Pair. The system responds
with Please search for
Bluetooth devices on your
phone, select your vehicle,
confirm or enter the pin number
provided on the screen.
3. Start the pairing process on the
phone to be paired.
4. Locate and select the device
named after the vehicle make
and model in the list on the
mobile phone. Follow the
instructions on the mobile phone