Chevrolet camaro Owner's Manual page 55

54 Infotainment System
Tune AM (frequency), Tune FM
(frequency), Tune DAB
(frequency): Instructs the system
to go to the specific station.
Thumbs Up: Instructs the system
to give the current song or station a
thumbs up in Stitcher.
Thumbs Down: Instructs the
system to give the current song or
station a thumbs down in Stitcher.
Phone Commands
Dial or Call (phone number or
contact): Instructs the system to
start a phone call. For example, say
Dial 1 248 123 4567. To call a
phone book contact, say Dial or
Call, say the name and location,
and then say Dial. For example,
say Call John at Home or Call
John at Work. If a number is not
recognised, the first number in the
list will be called.
Pair or Connect: Instructs the
system to begin pairing a device.
Digit Dial: Instructs the system to
dial a phone number one digit at a
time. After saying the digits,
say Dial.
Redial or Redial Last Number:
Instructs the system to dial the last
phone number called.
Select Device or Change Phone:
Instructs the system to switch to a
different paired device. The device
must be selected from the screen or
using the MENU/SELECT knob.
Delete Device: Instructs the
system to delete a paired device.
Read Text Messages or Read SMS
Messages: Instructs the system to
begin reading text messages from
paired device.
Not all devices support text
messages. Applicable where
equipped.
My Media Commands
AUX, USB, or Bluetooth Audio:
Instructs the system to change the
source.
The following commands only apply
to USB, iPod and iPhone sources.
They are supported after the device
has been indexed.
Play Artist (artist name): Instructs
the system to play songs by a
specific artist. For example, say
Play Artist <artist name>.
Play Album (album title): Instructs
the system to play a specific album.
Play Song (song title): Instructs
the system to play a specific song.
Play Genre (genre name):
Instructs the system to play songs
of a particular genre.
Search Artist (artist name):
Instructs the system to show a list of
all songs by a specific artist. For
example, say "Search Artist
<artist name>.
Search Composer (composer
name): Instructs the system to
show a list of all songs by a specific
composer. For example, say
"Search Composer
<composer name>."