Configuration Switch - Plantronics sp05 Instruction Manual

Table of Contents

Advertisement

fI
PLANTRONles
Configuration Switch
~
]0011
Configuration Switch: This 2-part "Configura-
tion" switch enables you to select the proper
setting so that the SP05 will work with your tele-
phone. There are two controls to the switch.
Each has two positions I and 11. There are four
possible settings, as follows: (1-1). (1-11). ( Il-
l), (11-11). For each setting, set the switch to the
desired configuration, then lift the handset and
listen for the dial tone. If you hear a dial tone the
Rotary Transmit-Volume Control
This volume control allows you to adjust the vol-
ume of the outgoing sound and the high and low
frequencies associated with it. To fme tune, place a
call and talk, rotating the control (with the tool pro-
vided - see inside the battery compartment) until
the desired level is reached. The person you are
speaking with will be able to tell you when the opti-
mum sound and tone level is reached. You may
wish to switch from headset to handset and back
again for comparison. For best results, begin at the
12 o'clock position and adjust as necessary.
(In adjusting volume controls - both send and re-
ceive - rotating the volume control to the maximum
setting may cause the headset to "squeal". This
receive is working. Be sure the headset switch is
"on" with the color indicator visible. To test for
transmit, listen for the dial tone and then hit a
dial button number. Begin to talk. You will be
able to hear yourself speak. Be sure the headset
switch is "on" and that the Mute Switch is "off',
with the color indicator not visible. You only
have to set the configuration switch once when
you first install your headset.
PHONES
SETTINGS
AT&T System 25, 75, 85
Merlin (no batteries)
11-11
Panasonic
Electronic "Chirp" Ring Phones
AT&TTraditionallOOO/13000/16000
11-1
All AT&T 400/700 Series
AT&T Feature phones and
Partner Phones
Carbon "Bell" Ring Phones
(no batteries)
1-1
GTE Phones
1-11
will not damage the unit; simply reduce the set-
ting until the "squealing" stops.)

Advertisement

Table of Contents
loading

Table of Contents