Advertisement
Proceed as tollows with the set-up and
connections,
1. Place the tuner on top of the cassette tape deck
5. Place the turntable on top of the tuner.
amplifier.
6. Connectthe turntable's output cords to the cassette tape
2. Connect the tuner to cassette tape deck amplifier.
deck amplitier's PHONO jacks. lf any other stereo compo-
3. Connect the FM antenna and the AM antenna to the
nent is to be used, connect it in the same way to the CD or
tuner's antenna terminals.
VIDEO jacks.
l f t h e m o d e l h a s a n A M / F M C H A N N E L S T E P s w i r c h ,
7 . C o n n e c t t h e s p e a k e r c o r d s l o t h e S P E A K E R S t e r m i n a l s .
check whether il is posilioned properly.
L Finally, connect the power cord the the AC wall socket.
4. Attach the turntable legs at the left and right ol the cas
sette tape deck amplifier s rear panel.
Plug the power cord into the AC wall socket outlet only after all
the connections have been completed. Keep the power switch at
the OFF position.
l l l u s t r a t i o n n o t a e o l i c a b l e t o U . K . m o d e l .
Connecting tho input/output cords
a Inserl the plugs securely into the jacks. lmpfoper con-
nectaon can lead to sound drsto(ion or malfunctioning.
a The white plug is for the left channel connection and
the red pl'rg {or the fight channel connectron.
Be sure to insert the plugs all the way.
White plug
Red plug
mi#
eod
Connecting
t h e
strands.
.
Check that the speaker cords arc secure and will nt become
disconnected.
NOTE:
Do not allow the conductors of the cods to prciect beyond the ter-
minals and to come into contact with other conductors. A
brcakdown or failurc may occur when conductots touch one
Speakel impedance
Connect speaker systems with a nominal impedance of bet-
ween 6 and 16 ohms.
(Left)
S p € a k e r ( R i g h 0
Video disc play€.. etc
Attaching the legs of the turntable
Attach the legs accompanying the turntable to the rear panel
ot the cassette deck amDlifier.
. Be sure lo attach the left (L) and righr (R) legs to their
proper posnons.
1 . Insen the guide pins on the legs into the holes in the back
ot the cassette deck amplitier.
2. Fasten the legs in place with the screws provided.
3. After connecting the antenna,
curely on top ot the legs.
m o u n t t h e t u r n t a b l e s e -
Turntable leg (Rl
Advertisement
