Assign Volume Control To Another Mode - Philips SBC RU760 Instructions For Use Manual

RU760.qxd 04-06-2004 16:59 Pagina 12
Instructions for use
4
Press the SELECT key twice to confirm
– The mode light will blink twice to confirm
the selected mode is reset to default settings.
• If the mode light blinks once for a longer
time, the reset failed.Try again from step 1.

Assign Volume control to another mode

The volume controls (Volume up,Volume down and Mute) on the RU760
are assigned to either your TV or your amplifier/receiver, depending on the
device you have selected;
MODE
TV mode selected ............................Volume controls work with TV
VCR mode selected.........................Volume controls work with amplifier/ receiver
DVD mode selected .......................Volume controls work with amplifier/ receiver
SAT mode selected..........................Volume controls work with TV
Receiver mode selected................Volume controls work with amplifier/ receiver
CD mode selected...........................Volume controls work with amplifier/ receiver
If you want a different setup, the volume control assignment can be changed.
Example: In VCR mode you want to operate the TV volume control
1
Select the VCR mode with the SELECT key.
2
Press keys 1 and 6 simultaneously for
5 seconds until the label of the selected
mode blinks twice and remains lit.
3
Press keys 9, 9 and 3, in that order.
4
Select the TV mode with the SELECT key.
12
VCR DVD SAT AMP CD
LEARN SELECT
TITLE AUDIO
DISC
VOLUME CONTROLS
VCR DVD SAT AMP CD
LEARN
TITLE
TV
1
AUX
4
7
SHIFT
TV
1
AUX
4
7
SHIFT
VCR DVD SAT AMP CD
LEARN
TITLE
2 x
GUIDE
CHAPTER SUBTITLE
SYST.MENU
SELECT GUIDE
AUDIO CHAPTER SUBTITLE
SOURCE
VCR DVD
2 3
TUNER CD
5 6
8 9
0
SOURCE
VCR
DVD
2 3
TUNER CD
5 6
8 9
0
SELECT GUIDE
AUDIO CHAPTER SUBTITLE