Ikelite Ds51 Dig. Strobe; Ds51 Specifications - Ikelite DS51 Instructions Manual

I KELITE DS 5 1 STR O BE

DS51 SPECIFICATIONS

Weight ....................................................0.6kg (1.3 lbs.) with batteries
Energy Rating ........................................50 watt-sec.
Coverage Angle ....................................70° (80° with diffuser)
Widest Angle Lens ................................28mm SLR
Guide Number (ISO 100) feet ...............56 surface, 28 underwater
Guide Number (ISO 100) meters ..........17 surface, 9 underwater
Firing Modes ..........................................TTL/Auto, Full, 5 fractional powers
Color Temperature
Power Source ........................................4 AA-cell alkaline, NiCad, or NiMH
Flashes ..................................................200 full power
Recycle Time..........................................3.5 seconds (full power)
Depth Rating ..........................................90m (300 feet)
CE - Compliant with applicable EU directives
Complies with FCC part 15, subpart B, Section 15.109 for Class "B" Products
Knob
Strobe
Ready
Light
Caution:
- The DS51 bulkhead connector is not waterproof and must be capped when not
connected to a cord or sensor. Using a DS51 underwater with the bulkhead
connector uncapped or unconnected will cause the strobe to flood. Do not
continue to use a flooded strobe: return to Ikelite for repair.
- The strobe is factory sealed; do not disassemble. Disassembly will void your
Ikelite DS51 limited warranty.
-
Do not continuously fire the strobe more than 15 times above water in rapid
succession. If this does happen, allow the strobe to cool down for at least 10
minutes.
Battery Door
Mode Switch
Waterproof
Bulkhead
Cap
5700°K
ikelite
SUBSTROBE
Bulkhead
Connector
(waterproof cap
removed)
51
DS
Bulkhead Cap
3