Table of Contents
Advertisement
Quick Links
B-Speech®Medo
Bluetooth Headset
Introduction
This Wireless headset is base on Bluetooth technology, connects to a compatible phone without
wires. It is easily converting your mobile phone communication to the headset and provides fast
and reliable voice transmission to you.
Note: This Bluetooth headset just supports "call receiving" function, if Bluetooth phone
only has headset profile, without hands-free profile.
It doesn't support a Bluetooth phone without headset and hands-free profile, such as
Nokia 7650.
Getting started
Charging the battery
The headset has a rechargeable Lithium Polymer battery. You have 2 ways to charge the battery:
1.
Charging by the AC charger
a Connect the charger cable to the charger connector on headset
b Connect the charger to an AC wall outlet. The red LED is on, during charge mode. It takes
around 2.5 hours to fully charge the battery. The red LED is off when the battery is full.
2.
Charging by USB on the PC or notebook
a Connect the USB cable to the charger connector on the headset.
b Connect the other end of USB cable to the USB port on the PC or notebook
c The RED LED is on when the headset is charged. It takes about 2.5 hours to fully charge the
battery. The red LED is off when the battery is full.
With battery fully charged, the talk time will be 7 hours, and the stand-by time will be about
150 hours.
Battery Low
When the battery is low, the RED LED flashes, the headset will produce a warning sound.
Rev. 0.7 (2005/8/17)
Manual
1 / 6
Advertisement
Table of Contents
Related Manuals for B-Speech Medo
Summary of Contents for B-Speech Medo
- Page 1 B-Speech®Medo Manual Bluetooth Headset Rev. 0.7 (2005/8/17) Introduction This Wireless headset is base on Bluetooth technology, connects to a compatible phone without wires. It is easily converting your mobile phone communication to the headset and provides fast and reliable voice transmission to you.
- Page 2 Prepare your phone for turning on Bluetooth function, searching new device, according to the phone user’s guide. Make sure the product is within 5m of the phone. “B-Speech Medo” appears in the pairing list on your phone. Selects it. Key-in the password “1234”.
- Page 3 B-Speech®Medo Manual Terminate a call Press the main button during the talking mode to terminate the call. Making a call When the headset is connected to your phone, make a call by using your phone in the normal way. Making a voice dialing If your phone supports voice dialing, and it is activated, you can use this feature with this headset 1.
- Page 4 B-Speech®Medo Manual Transfer a call You can transfer a current call directly to your phone. Press for 3 to 4 seconds the main button during the call until hearing a beep. ** No all the Bluetooth phones support this feature. If it is the case with your phone, pressing the main button may end the call and not transfer it to the phone.
- Page 5 B-Speech®Medo Manual may damage electronic circuit boards. - Do not attempt to open the headset. Non-expert handling may damage it. - Do not drop, knock or shake the headset. Rough handing can break internal circuit boards. - Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the headset.
- Page 6 B-Speech®Medo Manual Bluetooth passkey Each headset has a default passkey 1234 for pairing, which is stored in its internal memory. You are usually required to enter the passkey 1234 in a pairing process with a Bluetooth mobile phone or other devices, however it depends on the kind of Bluetooth device that the headset is to connect to.
Need help?
Do you have a question about the Medo and is the answer not in the manual?
Questions and answers