Toyota Corolla 2011 Owner's Manual page 451

5-2. Steps to take in an emergency
Once the vehicle's engine has started, remove the jumper
STEP 6
cables in the exact reverse order in which they were con-
nected.
Once the engine starts, have the vehicle checked at your Toyota
dealer as soon as possible.
2.4 L 4-cylinder (2AZ-FE) engine
STEP 1
Connecting the jumper cables
Positive (+) battery terminal on your vehicle
Positive (+) battery terminal on the second vehicle
Negative (-) battery terminal on the second vehicle
Connect the jumper cable to ground on your vehicle as shown in
the illustration.
Start the engine of the second vehicle. Increase the engine
STEP 2
speed slightly and maintain at that level for approximately 5
minutes to recharge the battery of your vehicle.
456