Minolta 5600HS (D) Instruction Manual page 36

USE IN COMBINATION WITH OTHER PRODUCTS
Using Early AF Series Single Lens Reflex Cameras
(Maxxum/Minolta 9000, 7000, 5000)
• The optional flash shoe adapter FS-1200 is necessary. See the FS-
1200 manual for details.
Using APS Single Lens Reflex Cameras
(Vectis S-1, S-100)
• Flash is automatic in the P mode. Fill flash may be selected with the
flash-mode button on the camera.
• The shutter speed is set automatically in the S mode.
• High-speed sync cannot be used.
• Wireless photography is possible only with [1] on page 41 (Using The
Built-In Flash). See the camera manual for details of taking pho-
tographs.
• As the S-100 is not equipped with an auto lock accessory shoe, the
flash unit cannot be attached to the camera. Use with wireless flash.
Ratio-flash control cannot be used. Set to Channel 1.
• APS film (new system) differs in size from 35mm film, so that the flash
coverage differs at the same focal length. This flash unit is designed
for a flash coverage of 24mm with a focal length for 35mm film, so
that when used with APS film focal length flash coverage is 19mm.
For example, when the V Zoom 22-80mm f/4-5.6 lens is used the full
flash coverage is available.
70
Using Minolta Digital Cameras
(Dimâge RD3000, Digital camera RD-175)
• Flash is automatic in the P mode. Fill flash is used when a photo is
taken while the manual fill-flash button on the camera is pressed.
• The shutter speed is set automatically in the S mode.
• High-speed sync cannot be used.
• As the RD3000 has no built-in flash, only [2] and [3] on page 41 and
42 may be used for wireless flash. Use the spot button for test flash.
• Wireless photography with the RD-175 is possible only with [1] on
page 41 (Using The Built-In Flash). See the camera manual for details
of taking photographs.
71