Reset To The Default Settings; Custom Function - Minolta 5600HS (D) Instruction Manual

Minolta maxxum flash instruction manual
Table of Contents

Advertisement

RESET TO DEFAULT SETTINGS
Most of the flash functions return to
the default settings, as follows, if both
the + button and – button are pressed
and held for three seconds.
Item
Flash on/off
Flash coverage (zoom)
Flash mode (TTL/M/MULTI)
High speed sync (HSS)
Wireless/remote flash (WL)
Ratio control (RATIO)
Power level in TTL/M
Power level in multiple flash
Frequency in multiple flash (Hz)
Repetition in multiple flash (TIMES) 10
64
Settings
Page
On (Auto on or on)
15
Auto zoom (85mm)
23
36
TTL
On
38
Off
40
Off
1/1
58
1/32
62
60
5
61

CUSTOM FUNCTION

The various flash settings may be changed as necessary. The fol-
lowing five items may be changed.
• Wireless channel setting (channels 1~4)
• Flash range units (m/ft)
• Time to auto power off (4 minutes, 15 minutes, 60 minutes, none)
• Time to auto power off when using wireless (60 minutes, none)
• Exposure modes in which manual flash and multiple flash may be
set (M mode only, all modes)
1. Press the select button for 3
2. Press the select button to
seconds.
• The first item (wireless channel set-
ting) is displayed.
select the item, and press the
+ or – button to select the
desired setting.
• Each time the select button is
pressed, the next of the five items
appears on the data panel (see fol-
lowing page).
Continued on next page
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents