Memasang Kembali Unit Display; Procedure; Post-Requisites - Dell Inspiron 11 3000 Series Service Manual

Memasang kembali unit
display
PERINGATAN: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display back-cover and antenna assembly.
1 Place the display assembly on a flat and clean surface.
2 Align the screw holes on the display hinges with the screw holes on the
palm rest and keyboard assembly.
3 Replace the screws that secure the display assembly to the palm rest and
keyboard assembly.
4 Slide the display cable into the connector on the system board and close
the latch to secure the cable.
5 Slide the display-cable bracket into the slot on the palm rest and
keyboard assembly.
6 Align the screw hole on the display-cable bracket with the screw hole on
the system board.
7 Replace the screw that secures the display-cable bracket to the system
board.

Post-requisites

1 Replace the wireless
2 Follow the step 4 procedure in
3 Replace the battery.
4 Follow the procedure from step 2 to step 5 in
58
computer. After working inside your
card.
"Replacing the I/O
After working inside your
board".
"Replacing the base cover".