Other Operations; Drc (Dynamic Range Control); Av Sync; Turn Off The Sound Temporarily - LG MusicFlow HS8 LAS855M Owner's Manual

62 Operating
,
Note
y When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
- There is a obstacle between the unit and
the bluetooth device.
- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
y This unit supports Bluetooth auto pairing.
However it does not operate in the case
3
below:
- When you restart this unit.
- When you disconnect this unit by yourself.
- When you disconnect this unit on the
connected Bluetooth device.
y The sound may be interrupted when the
connection is interfered with by the some
other electronic wave.
y You cannot control the Bluetooth device
with this unit.
y Pairing is limited to "One" Bluetooth® device.
Multi-Pairing is not supported.
y Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y You can enjoy using Bluetooth® when using
Phone, MP3, Notebook, etc..
y The more distance between the unit and
the bluetooth device, the lower the sound
quality becomes.
y The Bluetooth® connection will be
disconnected when the unit is turned off or
the Bluetooth® device gets too far from the
unit.
y If the Bluetooth® connection is
disconnected, connect the Bluetooth®
device again.
y When a Bluetooth® device is not connected,
"BT READY" appears on the display window.

Other operations

DRC (Dynamic Range Control)

Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.

AV Sync

When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use C/V to control the time which you
can set at between 0 and 300 ms.

Turn off the sound temporarily

Press (Mute) to mute your unit.
You can mute your unit, for example, to answer
the telephone, "MUTE" is displayed in the display
window.
To cancel it, press (Mute) again on the remote
control or change the volume level.