Table of Contents
Advertisement
Quick Links
FOR CUSTOMER SERVICE
PARA EL SERVICIO
PARA EL CONSUMIDOR
1-888-278-8092
Printed in Taiwan
®
®
SNAP-ON
IS A TRADEMARK LICENSED BY SNAP-ON
CORP.,
U.S.A., WHICH DOES NOT MANUFACTURE OR
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
870014 – 16 Gauge Finish Nailer _Rev 8/19/07
16 GAUGE FINISH NAILER
INSTRUCTION MANUAL
THIS
MANUAL
CONTAINS
IMPORTANT
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO
COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR SNAP-ON PRODUCT, DO
NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT
1-888-278-8092. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL No.,
DATE PURCHASED AND STORE LOCATION.
MODEL #870014
INFORMATION
REGARDING
SAFETY, OPERATION,
Advertisement
Table of Contents
Related Manuals for Snap-On 870014
Summary of Contents for Snap-On 870014
-
Page 1: Instruction Manual
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE PARA EL CONSUMIDOR DIRECTED TO: IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR SNAP-ON PRODUCT, DO ©COPYRIGHT 2007 ALLTRADE TOOLS, LLC. NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT... -
Page 2: Table Of Contents
TABLE OF CONTENTS CONGRATULATIONS! Thanks for choosing this product. Our aim is to provide you with the highest quality prod- CONGRATULATIONS! ......... 2 ucts, and we want you to be totally satisfied with your product and our Customer Service. -
Page 3: Important Information About This Manual
IMPORTANT INFORMATION ABOUT THIS MANUAL CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, Improper maintenance and operation are responsible for the majority of accidents if not avoided, may result in property damage. involving finish nailers. The largest portion of these could be prevented by recog- nizing the basic safety rules and precautions. - Page 4 Always use hearing protection to protect your ears against Do not connect finish nailer to an air source capable of generat- hearing loss due to exhaust noise. Always wear proper safe- ing more than 200 psi (14.06 kg/cm G). Over-pressurizing the fin- ty glasses to prevent injuries to the eyes from fragments of ish nailer will result in bursting, abnormal operation or breakage of the work piece, defective nails or other debris caused by using the finish...
-
Page 5: Functional Description
COMPONENT INSTALLATION Thoroughly clean and maintain the finish nailer after every use. Lubricate Never use a non-relieving air coupler with the finish moving parts to prevent rust and minimize friction related wear. Wipe down the nailer. Always use couplers that release any built-up charge in the finish nail- entire tool and remove all dust from the moving parts. -
Page 6: Operating The Finish Nailer
To improve the connection between the quick disconnect and air nailer, and to help OPERATION IN SINGLE SEQUENTIAL ACTUATION MODE prevent oxidation, apply PTFE tape or joint compound to the connector threads To select the Single Sequential Actuation Mode (see before insertion. -
Page 7: Adjusting Depth Of Nailing
To select Contact Sequential Actuation Mode (see Figure 2): 1. Press and hold Actuation Selector embedded in the Always disconnect the air nailer before making any trigger. adjustments to the nail depth knob. 2. Rotate Actuation Selector up to the Contact USING THE HOOK Sequential Actuation (TTT). -
Page 8: Required Daily Preparation
In order to prevent the surface of the work piece from being 6. Select Single Sequential Actuation Operation. Check for leaks. Without pulling scratched or damaged, use the no-mar nosepiece. Install the trigger, press the work piece contact against the work piece. The tool MUST no-mar nosepiece by pressing it into place on the nose NOT operate. -
Page 9: Changing Direction Of Exhaust Air
OVERALL MAINTENANCE OF AIR NAILER CHANGING DIRECTION OF EXHAUST AIR The direction of exhaust air on the air nailer can be Always disconnect the air hose from air nailer before directed 360˚ degrees by placing hand on exhaust attempting any type of maintenance or visual inspection of tool. cover and turning. -
Page 10: Mandatory Maintenance
PROBLEM POSSIBLE CAUSE SOLUTION MANDATORY MAINTENANCE Increase air pressure, Ensure proper air pres- All maintenance and repairs should be performed by an sure is being used. Do not exceed 120 psig authorized repair facility. Call 1-888-278-8092 to obtain a list of repair facil- (8.3 bars, 8.5 kg/cm Weak drive. -
Page 11: Parts Diagram
PARTS DIAGRAM PARTS LIST ITEM NO. PART NO. DESCRIPTION A0000-0221 Screw Set M5*8 A0005-0691 Washer 12*1 A0304-0661 Exhaust Cover A0200-0631 O-Ring 9*1.9 B0000-0301 Screw Set M5*25 A0000-0111 Screw M5*25 A0005-0031 Washer #5*1.21 A0301-1561 Cap, Top A0200-2821 O-Ring 17.7*2.2 A0311-0481 Seal, Air A0100-1661 Spring B0300-4151... - Page 12 ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION A0303-0531 Cylinder A0316-0321 Hook A0309-0471 Bumper A0203-0191 Filter K0400-0681 Body and Handle Grip A0306-1161 Tail Cover A0401-1961 Body A0011-0161 Spring Pin 3*24 A0204-1701 Grip A0712-1531 Safety Cover A0313-0661 Main Body Bumper A0701-2341 Magazine A0006-1161...
-
Page 13: Specifications
Alltrade in writing. Under no circumstances shall purchaser of the accompanying SNAP-ON™ portable air tool and no one else all Alltrade bear any responsibility for loss of the unit, loss of time or rental, inconven- parts of the product (except those parts referred to below which are specifically ience, commercial loss, or consequential damages. - Page 14 (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALLTRADE'S AND/OR ITS The use of other than genuine Snap-On™ Repair Parts will VOID the warranty. REPRESENTATIVE (S) LIABILITY EXCEED THE PRICE OF THE PRODUCT. All LIA-...
Need help?
Do you have a question about the 870014 and is the answer not in the manual?
Questions and answers