Download Print this page

Asus PL-N12 Quick Start Manual

300mbps av500 wi-fi powerline extender.
Hide thumbs
   

Advertisement

¨
PL-N12 Kit
300Mbps AV500 Wi-Fi PowerLine Extender

Quick Start Guide

Applicable to PL-N12 and its multiple-pack kits.
This QSG uses PL-E41 powerline adapter to work with PL-N12 powerline extender.
PL-N12 Kit includes:
• PL-N12 Wireless-N300 Wi-Fi PowerLine
• PL-E41 Homeplug AV 500Mbps PowerLine Adapter
Plug-n-Play
Setting up your wireless network
NOTE:
Use the same steps to set up more
Wi-Fi powerline devices.
PL-E41
Wi-Fi Clone (optional)
Use your router's wireless network name and password to
PL-N12 settings.
1.
Place your PL-N12 next
3.
Press the Clone
to your router, and turn
button on your
both devices on.
PL-N12.
2.
Press the WPS button on
your router.
4.
NOTE:
If Wi-Fi Clone succeeds, move your PL-N12 to your preferred
location. If it fails, follow the steps in PL-N12 Wireless Settings.
NOTE:
power LEDs turn on.
PL-N12
your
Your extender blinks
slowly for a few seconds
Model No. PL-N12
Your PL-N12 and your router
now have the same wireless
network name and password.
Wait until the powerline and
Have fun!
To connect devices to your PL-N12 Wi-Fi powerline,
refer to the Wi-Fi information sticker for the default
network name (SSID) and password.
To customize your PL-N12 network name (SSID)
and password, refer to the section PL-N12 Wireless
Settings.
Your Configuration
Customized Wireless Network Name
Customized Wireless Password

Advertisement

   Related Manuals for Asus PL-N12

   Summary of Contents for Asus PL-N12

  • Page 1: Quick Start Guide

    PL-N12 Kit 300Mbps AV500 Wi-Fi PowerLine Extender Quick Start Guide Applicable to PL-N12 and its multiple-pack kits. This QSG uses PL-E41 powerline adapter to work with PL-N12 powerline extender. PL-N12 Kit includes: • PL-N12 Wireless-N300 Wi-Fi PowerLine NOTE: Wait until the powerline and •...

  • Page 2

    Set up your PL-N12 via wired or wireless connection. For details, refer to the section PL-N12 Extender How do I reset my PL-N12? PL-E41 Adapter Plug-n-Play on the previous page. With your PL-N12 switched on, use a pin to press and hold the Reset button until the Wi-Fi LED starts blinking. When the power LED turns green and the Wi-Fi LED is on, the reset process is completed. Power LED Ethernet LED Powerline LED My devices cannot connect to the Internet.

Comments to this Manuals

Symbols: 0
Latest comments: