Definitions: Safety Guidelines; Technical Data; Safety Instructions For Power Tools - DeWalt DWE6005-XE Instruction Manual

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if
not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
CALL US AT: 1800 338 002 (Aust) or 0800 339 258 (NZ).

Technical Data

Voltage
Power output
No load speed
Cutting depth
Cutters diameter (max)
Collet size (max)
Weight
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 60745.
Vibration emission value a
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications
WALT TOOL,
E
of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account
DWE6005-XE
the times when the tool is switched off or when it is running but not actually doing
V 230
the job. This may significantly reduce the exposure level over the total working
W 590
period.
min 16000 – 34000
-1
Identify additional safety measures to protect the operator from the effects of
mm 22
vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
mm 25.4
mm 6.35 (1/4")

SAFETY INSTRUCTIONS FOR POWER TOOLS

kg 1.5
When using power tools, always observe the safety regulations applicable in your
country to reduce the risk of fire, electric shock and personal injury. Read the following
safety instructions before attempting to operate this product. Keep these instructions in
a safe place.
1
dB(A)
dB(A)
dB(A)
dB(A)
h
m/s
2
m/s
2
78
3
89
3
< 2.5
1.5