Attaching To The Unbundled Adapter - Samsung SND-L5083R User Manual

Table of Contents

Advertisement

installation & connection

attaching to the unbundled adapter

Choose and purchase a necessary one of the following options (unbundled) that is suitable
to the installation site or for your convenience.
1. Remove the dome cover from the case by referring to
the "Disassembling" section. (page 33)
2. Use the provided machine screw to fix the camera
case to the unbundled adapter.
3. Connect and arrange the necessary cables lest that
they should be damaged or twisted while installing the
camera.
4. Install the camera body in the reverse order of
"Disassembling".
5. Adjust the lens in a desired direction by referring to the
"adjusting the monitoring direction for the camera" section. (page 39)
6. Close the dome cover.
To ensure waterproofing, tight up the fixing bolts using the L-wrench.
`
outdoor installation
When you install it outside of the building, please waterproof it with waterproof butyl rubber
tape (can be purchased in stores) so that water does not leak from the gap of the cable
connected to the outside.
1. Connect the cable.
2. Wrap the black cable jacket (Area A) and the
cable connection area with waterproof (butyl
rubber) tape so that more than half of the
butyl rubber tape is overlapped.
If the cable jacket is not waterproofed properly,
`
J
then it can directly cause leakage. Make sure to
protect the cable with a dense layer of taping.
Waterproof butyl tape is made of butyl rubber that can be stretched to twice its normal length.
`
36_ installation & connection
Camera
Camera
A
Camera
System
System
A
System

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Snd-l5013Sno-l5083rSnv-l5083r

Table of Contents