Lexus ES350 Manual page 305

Hide thumbs Also See for ES350:
Table of Contents

Advertisement

When the message is displayed on the multi-information display showing that
TRAC has been disabled even if the VSC OFF switch has not been pressed
TRAC and hill-start assist control (hybrid vehicles) cannot be operated. Contact
your Lexus dealer.
When the 12-volt battery is disconnected
The steering wheel may move from its straight forward position, but this will be cor-
rected automatically when driving.
Sounds and vibrations caused by the ABS, brake assist, VSC and TRAC systems
A sound may be heard from the engine compartment when the brake pedal is
depressed repeatedly, when the engine <hybrid system> is started or just after the
vehicle begins to move. This sound does not indicate that a malfunction has
occurred in any of these systems.
Any of the following conditions may occur when the above systems are operating.
None of these indicates that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly after the ABS is activated (gasoline vehi-
cles).
• The brake pedal may move down slightly after the ABS is activated (gasoline
vehicles).
EPS operation sound
When the steering wheel is operated, a motor sound (whirring sound) may be heard.
This does not indicate a malfunction.
Automatic reactivation of TRAC and VSC systems
After turing the TRAC and VSC systems off, the systems will be automatically re-
enabled in the following situations:
When the "START STOP ENGINE" <"POWER"> switch is turned off
If only the TRAC system is turned off, the TRAC will turn on when vehicle speed
increases.
If both the TRAC and VSC systems are turned off, automatic re-enabling will not
occur when vehicle speed increases.
ES350_300h_OM_OM33A60U_(U)
4-5. Using the driving support systems
305
4

Advertisement

Table of Contents
loading

Table of Contents