Connecting To Your Phone; Your Phone Book; Making A Call Using Speed Dial - TomTom rider Reference Manual

2. On/Off button
3. Speakers
4. LED
5. Volume down
6. Volume up
7. Charging connector
Before you can use your Bluetooth headset, fully charge the headset using the charger supplied
with the headset.

Connecting to your phone

Important: To hear voice instructions, hands-free calls or warning sounds, you need to use a
compatible headset with your TomTom Rider. For more information and a full list of compatible
headsets, go to tomtom.com/riderheadsets.
First you must establish a connection between your mobile phone and your TomTom Rider.
Tip: Do not pair your headset with your mobile phone. If you do this you will not be connected
to your TomTom Rider and will not hear any navigation instructions.
Tap Mobile phone in the Options menu. Tap Manage phones and select your phone when it is
shown in the list.
You only need to do this once, and your TomTom Rider will remember your phone.
Tips
Make sure that you switch on Bluetooth® on your phone.

Make sure that your phone is set to "discoverable" or "visible to all."

You may have to enter the password "0000" on your phone in order to connect to your

TomTom Rider.
To avoid having to enter "0000" every time you use the phone, save your TomTom Rider as a

trusted device on your phone.
For additional information about Bluetooth settings, refer to your mobile phone user guide.

Your Phone Book

You can copy your mobile phone address book to your TomTom Rider.
Tip: To copy the phonebook from your mobile phone to your TomTom Rider, tap Get numbers
from phone.
Not all phones can transfer the phonebook to your TomTom Rider. For more information, go to
tomtom.com/phones/compatibility.

Making a call using speed dial

When you have established a connection between your TomTom Rider and your mobile phone,
you can use your TomTom Rider to make hands-free calls on your mobile phone.
57