Advertisement
Place swing-away pivot saddle into the receiver on front frame tube. Rotate the footrest inward until it locks into place on
locking bolt. To remove footrest, push release latch outward the frame, rotate footrest outward and lift.
4. Install/Remove Elevating Legrests (Optional)
To Install or remove elevating legrests see instruction for swing-away footrest above.
5. Footplates Height Adjust
To adjust footrest footplate or footrest height using a wrench to loosen the bolt in the bottom of the footrest,
inward/outward rotation, reposition footplate and retighten bolt.
6. Quick Release Wheels
To adjust remove wheels, push the center button and with an inward / outward motion, detach the wheels including axle to
slide out of the frame releasing the wheel from the frame.
a. Some models provide a push pin, tool
a. Some models provide a push pin, tool
less, adjustment abilities, simply push the
less, adjustment abilities, simply push the
button and adjust the height to a pre drilled
button and adjust the height to a pre drilled
hole and desired foot plate height.
hole and desired foot plate height.
b. Some models require a tool and is
included so locate the nut in the as shown,
loosen using tool provided, adjust the
height as necessary and then tighten nut,
with limitless increments of ride height on
tool (e.g. LT-980)
Advertisement
