Pureit Excella Instruction Manual page 9

SETTING UP PUREIT ExCELLA
5
Insert the Microcharged Membrane Assembly at
the base of the Cleansing Collection Chamber.
Twist in clockwise direction to fit.
7
Place the Top Chamber on the Cleansing Collection
Chamber, then place Sediment Filter in the Top
Cover and place it on the Top Chamber.
After fitting the Microcharged Membrane Assembly to the Cleansing Collection Chamber,
do not rest the assembly on a flat surface.
Please note that the first cycle will not give full 9L of water in the Transparent Chamber
since some water gets stored in the Cleansing Collection Chamber and the Top Chamber.
6
Now place the Cleansing Collection Chamber
on the Transparent Chamber.
8
Pour in water till the top of the Top Chamber and drain
out all the water that collects in the Transparent Chamber
for first two cycles. Place the lid on the Top Cover. Pureit
is now ready to use from third cycle onwards.
7