Table of Contents
Advertisement
Genuine Miller Accessories
Optima
™
A multipurpose,
microprocessor-based
pulse con trol for both
synergic MIG (wire
welding or GMAW) or
manual MIG pulsing.
Use this control with the
XMT 304/350 CC/CV
power sources and any Miller wire feeder,
including automatic feeders and spool
guns. Includes a 25 ft (7.6 m) cord with
14-pin plug. (Not for use with XMT 350
MPa or VS models.)
Extension Cords for Optima
#043 725 25 ft (7.6 m)
#043 726 50 ft (15.2 m)
#043 727 75 ft (22.9 m)
WC-24 Weld Control
#137 549
Designed for use with
Miller CV power sources
supplying 24 VAC and
14-pin recep tacles. For
use with Spoolmatic
30A spool gun.
WC-115A Weld Control
#137 546-01-1
Operates on 115 VAC
and is designed for
power sources without
a 14-pin receptacle. For
use with Spoolmatic 30A spool gun. Includes
10 ft (3 m) wall-type plug and power cord.
HF-251D-1
High-Frequency Arc
Starter and Stabilizer
#042 388
Portable 250 amp, 60%
duty cycle unit adds
high frequency to the
welding circuit to help start the arc when
using the DC TIG (GTAW) process.
Operates on 115 VAC, 50/50 Hz. See Lit.
Index No. AY/5.1.
Process Selector Control #042 872
Designed for use with dual wire feeders,
applications where electrical isolation and/or
polarity revers ing of weld current is required,
and for welding process changes. Includes
115 VAC/2 amp recepta cle, two 14-pin
receptacles and a 10 ft (3 m) 14-pin cord.
6
#043 389
Gas Solenoid Kit #195 286
Easy to install, optional gas solenoid kit for
TIG welding applications. Kit only works
with XMT 350.
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
Momentary- and maintained-contact rocker
switch for contactor control. Push forward for
maintained contact and back for momen tary
contact. Includes 20 ft (6 m) cord.
RCC-14 Remote Contactor and Current
Control #151 086
14-pin plug. Rotary-motion fingertip control
fastens to TIG torch using two Velcro
straps. Includes 28 ft (8.5 m) control cord.
RCCS-14 Remote Contactor and Current
Control #043 688
Up-and-down rotary-motion fingertip
control. Great for applications that require
a finer amperage control. Includes 28 ft
(8.5 m) control cord.
Extension Cords for Remote Controls
and 24 VAC Wire Feeders
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
14-pin plug to 14-pin socket.
Note: Not for use with Optima or 60M Series.
Inverter Racks
Four or Six-Arc Welding System
RFCS-14 Foot Control
#043 554
Heavy-duty foot current
and contactor control.
Includes 20 ft (6 m)
cord and 14-pin plug.
Provision to parallel power sources or
common work connections
RHC-14 Hand Control
Two lifting eyes for transportation
#129 340
Rugged skids for dragging or pushing
Miniature hand control
Customer can install up to a maximum
for remote current and
of 4 XMT 456 power sources
contactor control.
For detailed information on customized
Dimensions: 4 x 4 x
Inverter Rack systems see Lit. Index No.
DC/18.81.
Running Gear
RMLS-14
#129 337
14-pin plug
Regular
Cart
MIGRunner
MIGRunner
Small footprint and easily maneuverable,
®
with cylinder rack low enough that you do
not have to lift bottles.
Feeder mounts to tray above power source.
6 to 9 in (15.2 to 22.8 cm) in dia meter.
The Inverter Rack
conve niently houses
multiple XMT power
sources for multiple
welders. Both 4-pack
and 6-pack models
are available.
Features include:
XL Cart
Cart #195 445
™
XL Cart #195 246
™
XMT Cylinder Cart
#042 537
Carries two 160 lb
(72.6 kg) gas
cylinders, or one gas
cylinder and one
coolant system for
TIG (GTAW) welding.
Universal Carrying
Cart and Cylinder
Rack #042 934
Holds power source,
and gas cylinder up
to 56 in (142.2 cm)
high mea sur ing
Advertisement
Table of Contents
