Table of Contents
Advertisement
XMT
®
350 MPa Control Panel
The simple, powerful XMT 350 MPa can handle almost
any portable welding application.
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
1
OUTPUT ON
2
3
4
5
6
1. Output ON Indicator Light
2. Left Display
3. Voltage Display
4. Arc Length Indicator
5. Remote Control Receptacle
6. Process Selector Switch (Rotary Switch)
7. Adjustment Control
8. Right Display
Built-In Pulsed MIG Programs
The XMT 350 MPa expands the process capability of an XMT 350 with built-in Pulse MIG operation.
See the table below for the wide range of Pulsed MIG (GMAW-P) welding applications the
XMT 350 MPa can handle.
Wire Types
Steel
.035 STL
.045 STL
Metal Core
.035 MCOR
.045 MCOR
.052 MCOR
Stainless Steel
.035 SSTL
.045 SSTL
Aluminum
.035 AL4X (4000 Series)
3/64 AL4X (4000 Series)
.035 AL4X (5000 Series)
3/64 AL4X (5000 Series)
Nickel
.035 NI
.045 NI
Silicon Bronze
.035 SIBR
Copper Nickel
.045 CUNI
4
Setup
Arc Control
CC
Wire Type
Gas Type
SETUP
9. Setup Indicator
10. Amperage Indicator
11. Remote PC Interface
12. Setup Indicator Lights
• Arc Control Indicator
• Wire Type Indicator
• Gas Type Indicator
• Setup Button
Gas Types
90% ARGN/10% CO
(Argon/Carbon Dioxide)
2
95% ARGN/5% OXY (Argon/Oxygen)
90% ARGN/10% CO
(Argon/Carbon Dioxide)
2
TRI MIX (Tri-gas mixture: 81% ARGN/18% HE/1% CO
[Argon/Helium/Carbon Dioxide])
98% ARGN/2% OXY (Argon/Oxygen)
98% ARGN/2% CO
(Argon/Carbon Dioxide)
2
100% ARGN (Argon)
75% ARGN/25% HE (Argon/Helium)
100% ARGN (Argon)
75% HE/25% ARGN (Helium/Argon)
MPa
7
MPa: M (MIG), P (Pulse), a (Advanced
Arc Control). Advanced arc control
8
enables an improved pulse welding arc.
The operator has more control over puddle
9
10
and bead characteristics using SharpArc
In addition, the unit provides a more
robust and stable arc at very low arc
11
length, reducing heat input, and providing
the ability to weld on a wider range of
material thickness.
12
SharpArc
™
SharpArc controls welding arc cone width
in Pulsed MIG (GMAW-P) welding mode.
(0 setting)
Low Setting
If a gas is used other than what is listed
on the Pulsed MIG welding program
chart (below left), the SharpArc
adjusted to help customize your arc to the
gas being used.
Lower SharpArc
™
settings widen the arc
cone, increase puddle fluidity and flattens
the weld bead.
Additional Features
Auto Remote Sense
automatically use remote control if
connected to remote control receptacle.
Dinse International-style weld disconnects
provide high-quality weld cable connections.
Dinse and Tweco connectors are available.
2
When Dinse connectors are specified, two
connectors are supplied with the unit.
Optional 115 VAC auxiliary power provides
10 amps of circuit-breaker-protected power
for water circulators, etc.
™
.
(50 setting)
High Setting
™
can be
enables unit to
™
Advertisement
Table of Contents
