Configuration; Using The Web Configuration Interface - D-Link DCS-931L User Manual

Section 3 - Configuration

Using the Web Configuration Interface

After completing the Camera Installation Wizard, you are ready to use your camera. The camera's built-in Web configuration interface is designed
to allow you to easily access and configure your DCS-931L. At the end of the wizard, enter the IP address of your camera into a web browser, such
as Internet Explorer . To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password,
®
the default password is blank. After entering your password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20.
D-Link DCS-931L User Manual

Configuration

19 19