Sanji AT 70 User Instructions

The AT 70 is a new generation alarm and comfort
control system, designed to enhance the security of
factory fitted transponder immobiliser systems. Sanji
have incorporated the most up to date technology to
improve performance and long term reliability. Read
these instructions for correct system operation. All
points marked *
your dealer.
1) SETTING THE
ALARM
2) DOOR / BOOT
OPEN
WARNING
3) ALARM DELAY
PERIOD
4) SENSOR SHUT
DOWN
1 SEC
5) SENSOR SHUT
DOWN
continued
are optional features. Consult
to enable full Press the remote button
alarm and the unit will sound
features. 2 soft chirps and the
indicators will flash
twice. If fitted with
central locking the
doors will lock. The
sensor will switch on.
to warn the The unit will sound two
driver if a additional loud chirps
door or boot when setting the alarm.
is open when
setting the
alarm.
30 second The sensor led will
arming delay flash rapidly during the
period. 30 second delay period.
After the delay the
sensor led will go on
solid. Now the alarm is
fully set.
to disable the Press the remote to set
interior the alarm, and within 1
sensor so second press the remote
that a pet or again. The unit will
person can sound 2 normal chirps
remain inside followed by 3 loud
the vehicle chirps.
when the
alarm is
armed.
To confirm After the alarm delay
period the sensor led
sensor
shutdown will flash slowly as a
confirmation that the
mode.
sensor is shut down.
When You reset the
alarm this function
will be automatically
cancelled.