Front Panel Controls And Indicators; Technical Specifications Pro-Ject Power Box Rs Phono; Service; Warranty - Pro-Ject Audio Systems Pro-Ject Power Box RS Phono Instructions For Use

Front panel controls and indicators

Toggle switch on the left side will enable or disable output socket with 2x18V. The blue LED above the switch
shows that the socket is active.
"Charging" is illuminated when batteries are charged.
"Mains" is illuminated when the unit is connected to the mains.

Technical specifications Pro-Ject Power Box RS Phono

Output voltage:
Battery type and capacity:
Charging time:
Battery playing time:
Power supply:
Dimensions W x H x D:
Weight:

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should
be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or changes to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.

Copyright, trademarks

Pro-Ject Audio Systems is a registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright © 2014. All rights reserved.
from +/-14,8V to +/-16,8V, depends on battery charge level
Li-ion, 2000mAh
approx. 4 hours (longer when Phono Box RS in use)
approx. 4 hours
20V/3A
201 x 72 x 195mm
2030g
© Pro-Ject Audio Systems · Pro-Ject Power Box RS Phono · Revision 2015.01.13
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
3