Specifications - Moen GEC8 LIVE Owner's Manual

Tutorial 2: Persist Strymon Timeline Trails (Spill Over)
B2 P2, Major preset: whatever, keep Timeline always on in the signal chain.
B2 P2, Shadow preset : loop1~8 off, MIDI CC# option 3 (Strymon on/off)
Ext. footswitch on: engage timeline via. midi, off: bypass timeline via. midi.
Note: ensure midi cable is connected between GEC and Strymon, the parameter
"persist"(delay machines) needs to be turned on in the Timeline.
Tutorial 3: Solo Boost
B2 P3, Major preset: loop1,3 on (overdrive, chorus)
B2 P3, Shadow preset : loop1,2(distortion),3, 4 (timeline) on, option 5(boost +2dB)
Ext. footswitch off: OD+CHORUS, on: DIST + Timeline (boost +2dB).
Note: ensure midi cable is connected between GEC and Strymon
5.4.3 Shadow footswitch preset
After the shadow midi preset is confirmed, it enters shadow footswitch options,
the segment led shows the option number with a dot.
The shadow footswitch preset allows user to customize FS1(footswitch) function,
It provide 5 options,
Option
FS1
Note: if FS1 is set to option other than NULL, the major preset will lose the control
to FS1.
Tutorial 1: Tap Tempo input of BOSS DD-20
B3 P1, Major preset: loop1,3 on (overdrive, DD-20)
B3 P1, Shadow preset : loop1~8 off, FS1 option 2(momentary N.C)
Ext. footswitch off: send tap tempo, on: send tap tempo
Note: Connect FS1 to the CTL PEDAL jack of DD-20, set CTL PEDAL as tap input.

6- Specifications

Dimensions...........................................460(L) x96(W)X68(H) mm
Weight...............................................................................1500g
Power Supply...........................................DC9V (Negative Center)
Current Drain...........................................................max. 350mA
Max. NBUF Input Vp-p.......................................................... 30V
Max. BUF Input Vp-p............................................................. 3V
0.
Latch
NULL
Normal Close
1.
Latch
Momentary
Normal Open Normal Close
7
2. 3.
Momentary
Normal Open