Chevrolet Trax 2016 Owner's Manual page 180

Press the play mode.
Tone Settings
1. Press .
2. Press tone settings. The Tone
Settings menu is displayed.
See Tone Settings under
Radio Controls with
Touchscreen in Operation
0 136.
Media Transfer Protocol (MTP)
This allows music files on a
supported MTP devices to be
played.
Playing Music Files
Connect the supported device to
the USB port.
After the infotainment system
reads the device, it will start
to play.
If a non-readable USB device is
connected, an error message
displays and the system will
switch to the previous audio
function.
Depending on the connected
device, some files may not play.
File loading may take few minutes
depending on the type of phone or
the number of file/folder stored in it.
When the MTP device is connected,
the Infotainment system scans
audio files first, then picture and
movie files. Picture and movie files
are not available even if the audio
file in MTP device is played.
MTP device that has external
memory may be recognized as
USB1/USB2.
For other USB operations see USB
Port 0 147.
When a MTP device is connected
and another app is running at the
same time, there may be a delay in
the rear vision camera.
iPod/iPhone Player
This feature is limited to models
supporting the iPod/iPhone
connection.
Playing Music Files
Connect the iPod/iPhone to the
USB port.
Infotainment System
Play will start from the previously
played point after the system
has finished reading the USB
device.
If a non-readable USB device is
connected, an error message
displays and the system will
switch to the previous audio
function.
Connect the iPod/iPhone to the
USB port.
Play will start from the previously
played point after the system
has finished reading the USB
device.
If a non-readable USB device is
connected, an error message
displays and the system will
switch to the previous audio
function.
If the iPod/iPhone is already
connected:
1. Press .
e
2. Press audio.
3. Press Source .
4. Press iPod.
179