Lexus GS350 Quick Manual page 80

5
Repeat the steps above to program another device for any of the remaining
®
HomeLink
■
Programming a rolling code system
GS350_200t_QG_OM30F25U_(U)
buttons.
1
Locate the "Learn" or "Smart" button
on the garage door opener motor in
the garage.
This button can usually be found where
the hanging antenna wire is attached to
the unit. The name and color of the but-
ton may vary by manufacturer. Refer to
the owner' s manual supplied with the
garage door opener motor for details.
2
Press and release the "Learn" or
"Smart" button.
3
Perform within 30 seconds after
2
performing .
3
Press and hold
®
HomeLink button (inside the vehicle)
for 2 seconds and release it. Repeat
this sequence (press/hold/release) up
to 3 times to complete programming.
If the garage door opener motor oper-
ates when the HomeLink
pressed, the garage door opener
motor recognizes the HomeLink
nal.
the desired
®
button is
®
sig-
80