1. Manuals
  2. Brands
  3. EURO Manuals
  4. Hob
  5. EG60BS
  6. Instructions for use and maintenance manual

EURO EG60BS Instructions For Use And Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Instructions for use and maintenance
AU
of HOBS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EG60BS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EURO EG60BS

Summary of Contents for EURO EG60BS

  • Page 1 Instructions for use and maintenance of HOBS...
  • Page 2 Index Introduction Technical data and - Thank you for choosing one of our qua- lity products, capable of giving you the specifications .......3 very best service. To make full use of its Installation ......3 - 6 performance features, read the parts of Ventilation ........

  • Page 3: Installation

    Technical data Technical data Installation GAS BURNERS CHARACTERISTICS Burner Injector Consumption 1/100mm MJ/h Natural auxiliary Gas 1.00 kPa semi-rapid rapid 11.7 triple internal 15.9 external Propane auxiliary Gas 2,75 kPa semi-rapid rapid triple internal 14.1 external ELECTRIC HOTPLATES INSTALLATION ø 145 mm 1,0 kW - Normal hotplate This appliance shall be installed only by 1,5 kW - Rapid hotplate authorised personnel and in accordance...

  • Page 4: Ventilation

    Installation VENTILATION cers must be then directly screwed into The rooms in which gas appliances are in- the three holes pierced (D) in the hotplate stalled must be well ventilated in order to al- base. (please see figure 12) low correct gas combustion and ventilation. Place the hob in the hole in the work top, Ventilation must be in accordance with AS making sure that the adhesive ensures a...
  • Page 5 Installation number label. - access the by-pass with a small screwdriver and back off by about 3 turns (turning the REPLACING INJECTORS (fig. 8) screwdriver anti-clockwise); The hob is preset with natural gas. The ap- - turn the tap rod anti-clockwise again until pliance is preset with the injectors necessary it stops: the burner will be at maximum for adaptation to bottled gas ( propane).

  • Page 6: Installation

    Installation FOR HOBS WITH ELECTRIC IGNITION electrical wires of the spark plugs (if pre- The correct gap between the electrode and sent) are not close to the injectors, so that the burner is shown in figure 10. they cannot run across them. If no spark is generated, do not keep on trying as this might damage the generator.

  • Page 7: For The User

    For the user pressing the button on the control panel once HOW TO USE THE HOB or more, or by pressing the knob of the burner VENTILATION to be ignited. All gas cooking appliances produce heat and Ignition will be even easier if there is a pan on moisture in the rooms where they are installed.

  • Page 8: For The User

    For the user - if the hotplate is to be out of use for a long GENERAL PRECAUTIONS time, apply a little grease to its painted sur- Warning: Servicing should be carried out only face; authorised personnel. - do not allow spills to burn onto the hotplate, - The power supply must always be discon- requiring the use of abrasive cleaners.

  • Page 9: Figures

    Figures A = AUXILIARY R = RAPID P1= HOTPLATE Ø SR = SEMI-RAPID TC = TRIPLE FLAME P2= HOTPLATE Ø CONNECTION DIAGRAM SINGLE-PHASE + NEUTRAL SINGLE-PHASE + NEUTRAL SINGLE-PHASE + NEUTRAL THREE-PHASE THREE-PHASE THREE-PHASE Wire gauge Wire gauge Wire gauge Wire gauge Wire gauge Wire gauge...
  • Page 10 Figures 4 4 4 4 6 6 6...

  • Page 11: Figures

    Figures...
  • Page 12 Ed. 22/09/2009 334499.01...

Table of Contents