When It Is Time For New; Tyres - Cadillac CTS Owner's Manual

Reset the Tyre Pressure Monitor
System. See Tyre Pressure
Monitor Operation 0 292.
Check that all wheel nuts are
properly tightened. See Wheel
Nut Torque under Capacities
and Specifications 0 333.
Warning
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle. In
an emergency, a cloth or a paper
towel can be used; however, use
a scraper or wire brush later to
remove all rust or dirt.
Lightly coat the centre of the
wheel hub with wheel bearing
grease after a wheel change or
tyre rotation to prevent corrosion
or rust build-up. Do not get
grease on the flat wheel
mounting surface or on the
wheel nuts or bolts.

When It Is Time for New

Tyres

Factors such as maintenance,
temperatures, driving speeds,
vehicle loading, and road conditions
affect the wear rate of the tyres.
Vehicle Care
Tread wear indicators are one way
to tell when it is time for new tyres.
Tread wear indicators appear when
the tyres have only 1.6 mm (1/16 in)
or less of tread remaining. See Tyre
Inspection 0 295 and Tyre
Rotation 0 295.
The rubber in tyres ages over time.
This also applies to the spare tyre,
if the vehicle has one, even if it is
never used. Multiple factors
including temperatures, loading
conditions, and inflation pressure
maintenance affect how fast ageing
takes place. GM recommends that
tyres, including the spare if
equipped, be replaced after six
years, regardless of tread wear. The
tyre manufacture date is the last
four digits of the DOT Tyre
Identification Number (TIN) which is
moulded into one side of the tyre
sidewall. The first two digits
represent the week (01 52) and the
last two digits, the year. For
example, the third week of the year
2010 would have a four-digit DOT
date of 0310.
297