Assemble Your Device - Samsung Galaxy Tab S User Manual

Android tablet
Hide thumbs Also See for Galaxy Tab S:
Table of Contents

Advertisement

Assemble Your Device

Prior to use, install the SIM card
and optional memory card
(not included), and charge the
battery.
Install the SIM Card
1. When you subscribe to a cellular network, you
are provided with a plug-in SIM card. During
activation, your SIM card will be loaded with your
subscription details, such as your PIN, available
optional services, and other features.
Warning: The plug-in SIM card information and its
contacts can be easily damaged by scratching or
bending, so be careful when handling, inserting, or
removing the card. Keep all SIM cards out of reach of
small children.
► Carefully slide the SIM card into the SIM card
slot until the card locks into place.
Make sure that the card's gold contacts face into
the device and that the angled corner of the card
is positioned as shown.
Caution: If the card is not inserted correctly, the
device will not detect the SIM card. Re-orient the
card and place it back into the slot if the SIM is
not detected.
Getting Started
Install a Memory Card
You can install an optional microSD or microSDHC
memory card (not included) to expand available
memory space.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
For more information on installing a memory card,
see
Install a Memory
Charge the Battery
Your device is powered by a rechargeable, standard
Li-Ion battery. A Wall/USB Charger (charging head
and USB cable) is included with the device for
charging the battery from any standard outlet.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Caution: Use only Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head,
and then plug the charging head into a standard
outlet.
4
Card.
Assemble Your Device

Advertisement

Table of Contents
loading

Table of Contents