Choosing A Display - FujiFilm X-E2S Owner's Manual

Choosing a Display

Choosing a Display
The camera is equipped with an electronic viewfi nder (EVF) and an LCD monitor (LCD). Follow the
steps below to choose a display.
1
Display the setup menu.
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Press the selector left to highlight
the tab for the current menu.
1.3 Press the selector down to high-
light the setup menu tab con-
taining u EVF/LCD SETTING.
1.4 Press the selector right to place
the cursor in the setup menu.
2 Select u EVF/LCD SETTING.
Highlight u EVF/LCD SETTING
and press MENU/OK.
The Eye Sensor The Eye Sensor
The eye sensor turns the viewfi nder on when you put your eye to the viewfi nder and turns
it off when you take your eye away (note that the eye sensor may respond to objects other
than your eye or to light shining directly on the sensor). If automatic display selection is
enabled, the LCD monitor will turn on when the viewfi nder turns off .
24
3
Choose a display.
Highlight one of the following op-
tions and press MENU/OK.
Option Option Description Description
Automatic
E EYE E
EYE
display selection
SENSOR SENSOR
using eye sensor
LCD monitor
LCD LCD
only
EVF EVF Viewfi nder only
Viewfi nder only;
EVF ONLY EVF ONLY
eye sensor turns
+ + E E
display on or off
EVF
LCD
LCD
EVF
EVF
Eye sensor