Section 8: Connections; Accessing Device Storage; Wi-Fi Connections - Samsung Galaxy S5 User Manual

Section 8: Connections

Accessing Device Storage

You can connect your device to a PC using an optional PC data cable using various USB connection modes.
Media device (MTP): allows you to transfer media files in Windows, or using an Android file transfer on a Mac.
Camera (PTP): allows you to transfer photos using the camera software, and transfer any files onto a PC that does
not support MTP.
Note: To sync your device to your computer it is highly recommended that you install Samsung Kies which is
available at http://www.samsung.com/kies
Note: If you are a Windows XP user, ensure that you have Windows XP Service Pack 3 or higher installed on
your computer. Also, ensure that you have Samsung Kies 2.0 or Windows Media Player 10 or higher
installed on your computer.
Connecting as a Storage Device
You can connect your device to a PC as a removable disk and access the file directory. If you insert a memory
card in the device, you can also access the files directory from the memory card by using the device as a memory
card reader.
Note: The file directory of the memory card displays as a removable disk, separate from the internal memory.
1. Connect the USB cable to the device and connect the cable to the computer. After a few seconds, a pop‑up
window displays on the PC when connected.
2. Open the folder to view files.
3. Copy files from the PC to the memory card.

Wi-Fi Connections

About Wi-Fi
Wi‑Fi (short for "wireless fidelity") is a term used for certain types of Wireless Local Area Networks (WLAN). Wi‑Fi
communication requires access to an existing and accessible Wireless Access Point (WAP). These WAPs can
either be Open (unsecured) as within most Hot Spots, or Secured (requiring knowledge of the Router name and
password).
Note: After you complete a connection to an active Wi-Fi network, the Wi-Fi Calling feature will automatically be
enabled.
Note: For additional information on WPS Connections, refer to "WPS Push Button" on page 74 and "WPS
PIN Entry" on page 74.
Activating Wi-Fi
By default, your device's Wi‑Fi feature is turned off (deactivated). Activating Wi‑Fi allows your device to discover
and connect to compatible in‑range WAPs (Wireless Access Points).
1. From the Home screen, tap Apps g
2. In a single motion touch and slide the Wi-Fi slider to the right to turn it on. The device scans for available
in‑range wireless networks and displays them under Wi‑Fi networks on the same screen.
(for Windows/Mac).
Settings g Wi-Fi.
Deactivating Wi-Fi
1. From the Home screen, tap Apps g
2. In a single motion touch and slide the Wi-Fi slider to the left to turn it off.
– or –
Activate and Deactivate Wi‑Fi from the Notification bar.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can reduce battery life and use times.
Connecting to a Wi-Fi Network
1. From the main Wi‑Fi screen, tap the network you wish to connect to.
Note: When you select an open network you are automatically connected.
2. Enter a wireless password (if necessary).
3. Tap Connect.
Manually Add a New Network Connection
1. From the main Wi‑Fi screen, tap Add Wi-Fi network.
2. Enter the Network SSID (the name of your Wireless Access Point).
3. Tap the Security field and select a security option. This must match the current security setting on your
target WAP.
4. Enter your WAP's password if the WAP is secure.
5. Tap Connect to store the new information and connect to the target WAP.
Note: No prompt to enter the WAP key displays if this is the second time to connect to a previously accessed
or secured wireless network. The WAP key is required when the device is reset using factory default
settings.
Manually Scan for a Wi-Fi Network
1. From the main Settings screen, tap
2. In a single motion touch and slide the Wi-Fi slider to the right to turn it on.
3. Tap Scan.
Settings g Wi-Fi.
Wi-Fi.
Section 8: Connections 69