Boot Device Priority; Boot Settings Configuration - Asus P4P800 SE User Manual

4.6.1 Boot Device Priority

Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available
devices. The number of device items that appear on the screen depends
on the the number of devices installed in the system. Configuration
options: [xxxxx Drive] [Disabled]

4.6.2 Boot Settings Configuration

Boot Settings Configuration
Quick Boot
Full Screen Logo
Add On ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Boot to OS/2
Wait for 'F1' If Error
Hit 'DEL' Message Display
Interrupt 19 Capture
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests
(POST) while booting to decrease the time needed to boot the system.
When set to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you wish to use the
ASUS MyLogo2™ feature.
ASUS P4P800-E Deluxe motherboard
[1st Floppy Drive]
[PM-ST32122A]
[SS-Pioneer CD-ROM]
[Yukon PXE]
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Auto]
[No]
[Enabled]
[Enabled]
[Disabled]
Specifies the boot
sequence from the
available devices.
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
4-33