Daitsu APU-DA30 User Manual page 25

6. Dust sensor
It can sense the cigarette smoke, pollen, dust and other particulate matter, and detect the air pollution level.
7. Button
On/off button and mode button respectively control the switch and operating mode of the machine.
8. Remote control
Set up the remote control to achieve perfect functional regulation.
9. Air inlet
Air inlet
10. Air outlet
Clean air blowing outlet
11. Handle
Use it when move the machine.
12. The remote control placing tank
It is used to place the remote control.
13. Plasma and negative ion generator
The Plasma produced can kill natural bacteria; negative ions produced can refresh the air.
14. Power Cord
It supplies power for the machine, and it has access to single-phase 220V ~ 50Hz AC.
15. Odor sensor
It can sense the different smell of cigarettes and pets, and it also very sensitive to pesticides, cosmetics,
aerosols, alcohol and other odor or sudden changes in temperature and humidity.
16. Wind speed indicator
Different indicator shines corresponding to different wind speed.
17. Timing lights
Instruct to set on/off time of the machine.
18. Replace the indicating lamp
If the light fl ashes, it indicates the HIMOP + HEPA fi lter component is in the replacement period.
19. Cleaning lamp
If the light fl ashes, it indicates fi lter components need to be cleaned.
20. Remote control receiver window
The signal reception is best if the remote control points here.
21. Mode
It indicates in what mode the machine is running.
23