Advertisement
Malfunction display and solutions
When the washer couldn't work well,being abnormal or in alarm,please check and correct it
as follows.
While the buzzer gives a bleep for 10 seconds,some program lights would be flickering.If
failing in clearing of faults,the buzzer would give a 10seconds,bleep every 15minutes.When
this situation lasts over an hour,the power supply would be cut off automatically.
Flickering simultaneously
Causes
NORMOL
Water flows into the
SOAK
washer abnormally.
DELICATE
SOAK
Water drain time out.
DELICATE
BULKY
NORMOL
Door is not closed.
SOAK
BULKY
NORMOL
Washings are partial
DELICATE
to one side.
BULKY
NORMOL
SOAK
Alarm for water
DELICATE
level sensor.
BULKY
Methods
Open the water tap.
Water pressure is too low.Try to
increase the inflow of water.
The drainpipe isn't put down
or needs unplugging.
Closed the door.
Please keep the clothes
balance.
Repair
17
Malfunction display and solutions
Technical specifications
Rated power supply
Input power of motor
Rated washing capacity
Rated spin capacity
Overall dimensions
Application water pressure
Weight of whole machine
Washing mode
Draining mode
Spin mode
220V / 50Hz
420W
5.0kg
5.0kg
X
X
510
520
866
0.03MPa~0.8MPa
28kg
New water flow
Upper drain
Centrifugal spin
18
Hide quick links:
Advertisement
