Table of Contents
Advertisement
As the colours of the wires in the mains lead of this appli-
ance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
1.
Connect the wire coloured green and yellow to the
terminal marked either with the letter "E" or by the
earth symbol
or coloured green and yellow.
2.
Connect the wire coloured blue to the terminal either
marked with the letter "N" or coloured black.
3.
Connect the wire coloured brown to the terminal ei-
ther marked with the "L" or coloured red.
4.
Check that no cut, or stray strands of wire is present
and the cord clamp
sheath.
Environmental concerns
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
10
4
is secure over the outer
5.
Make sure the electricity supply voltage is the same
as that indicated on the appliance rating plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp plug fitted
In the event of having to change the fuse in the plug sup-
plied, a 13 amp ASTA approved (BS 1362) fuse must be
used.
Warning! A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard. Ensure
that it is disposed of safely.
Important! Refer to the assembly instructions for the
installation.
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
2
.
www.zanussi.com
Advertisement
Table of Contents
