Asus IPIBL-LA Berkeley-GL8E Instruction Manual page 8

6. Close the load plate (A), then
push the load lever (B) until it
snaps into the retention tab.
7. If installing a dual-core CPU,
connect the chassis fan cable
to the CHA_FAN1 connector to
ensure system stability.
Notes on Intel
•
•
•
•
•
To use the Hyper-Threading Technology on this motherboard:
1. Install an Intel
Threading Technology.
2. Power up the system and enter the BIOS Setup. Under the Advanced Menu,
make sure that the item Hyper-Threading Technology is set to [Enabled].
The item appears only if you installed a CPU that supports Hyper-Threading
Techonology.
3. Reboot the computer.
4
Hyper-Threading Technology
®
This motherboard supports Intel
775-land package with Hyper-Threading Technology.
Hyper-Threading Technology is supported under Windows
Vista and Linux 2.4.x (kernel) and later versions only. Under Linux, use the
Hyper-Threading compiler to compile the code. If you are using any other
operating systems, disable the Hyper-Threading Techonology item in the
BIOS to ensure system stability and performance.
Installing Windows XP Service Pack 1 or later version is recommended.
®
Make sure to enable the Hyper-Threading Technology item in BIOS before
installing a supported operating system.
For more information on Hyper-Threading Technology, visit www.intel.com/
info/hyperthreading.
Intel Mainstream/Value FMB processor that supports Hyper-
® ®
B
Mainstream/Value FMB processor in the
®
IPIBL-LA (Berkeley-GL8E)
A
XP/2003 Server/
®