Levelling The Fridge-Freezer And Adjusting The Doors; Fitting The Handles; Electrical Supply Connection - Haier HRF-628AS6 User Manual

Levelling the Fridge-freezer and
Adjusting the Doors
Make sure that the appliance is on solid level flooring. If
the refrigerator is placed on a plinth, flat, strong and fire
resistant materials must be used.
This appliance has front adjustable feet, which can be
used to level the appliance.
Insert a suitable flat screwdriver into the slots of the
adjustable feet. Turn the screwdriver clockwise to raise
the feet (Fig.4-9), and counter-clockwise to lower the feet
(Fig.4-10).
Levelling the Doors
The doors may require some alignment before connecting
the fridge-freezer to the electrical supply. This can be done
by adjusting the levelling feet (Fig.4-9 and Fig.4-10).
To raise the left-hand door turn the left-hand foot clockwise
until it is level (Fig.4-11).
To raise the right-hand door, turn the right-hand foot
clockwise until the it is level.

Fitting the Handles

The door handles fix onto the mounting studs already fitted
to each door (Fig.4-12).
Use the Allen key from the instruction kit bag.
1. Place the handle firmly over the mounting studs.
2. Insert the grub screw into the hole located under each
handle standoff bar.
3. Using the Allen key, tighten the grub screw fixing the
handle to the door.
4. Fix the cover of top bolts to the right position.
Do not over-tighten the grub screw.

Electrical Supply Connection

Connect the appliance to the electrical supply (220-240 V ~
50 Hz) with the plug and lead, which ar
Connections to the mains supply should be in acc ordance
with local regulations.
The appliance must be plugged into an earthed
!
socket.
Always make sure that the plug is accessible a fter
!
the appliance has been positioned.
Fig.4-9
ArtNo.600-0035 - Adjust sting the feet
Screw cover
Grub screw
Standoff bar
17
Fig.4-10
Fig.4-11
Fig.4-12
Handle